Home > Motherboards > Supermicro Server Motherboards > Intel Xeon 7000 Series Supermicro Motherboards > Supermicro Intel Xeon E8501 Motherboards > Supermicro X6QTE+ Quad Dual-Core XEON 7100/7000 Intel E8501 Chipset 800MHz FSB DDR2 400 ATX Server Motherboard with On-Board Video, PCI-Express, SATA 3G/II, RAID, Dual GB LAN, IDE: MBD-X6QTE+-B (Bulk, Pack of 10)

Supermicro X6QTE+ Quad Dual-Core XEON 7100/7000 Intel E8501 Chipset 800MHz FSB DDR2 400 ATX Server Motherboard with On-Board Video, PCI-Express, SATA 3G/II, RAID, Dual GB LAN, IDE: MBD-X6QTE+-B (Bulk, Pack of 10)

Product Specification:

Product SKUs

MBD-X6QTE+-O	X6QTE+ (Standard Retail Pack)
MBD-X6QTE+-B	X6QTE+ (Bulk Pack)


Physical Stats

Form Factor	Proprietary ATX
Dimensions	16" x 14.3" (406.4mm x 363.2cm)


Processor/Cache

CPU	Quad 604-pin FC-mPGA4 Sockets Supports up to four Intel® 64-bit Xeon® processor(s) of the same type below: Dual-Core Intel® Xeon® Processor 7100/7000 Series with 2MB L2 Integrated Advanced Transfer Cache
System Bus	667/800 MHz system bus
Operating System Software	Supports 64-bit Operating Systems Supports 32-bit Operating Systems


System Memory

Memory Capacity	Sixteen 240-pin DIMM sockets Supports up to 64GB ECC DDR2 400MHz memory Dual channel memory bus Memory must be populated in pairs and all be of same type
Memory Type	DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	512 MB, 1GB, 2GB, 4GB
Memory Voltage	1.8 V only
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® E8501 chipset MCH + ICH5R + 82571
SATA	ICH5R SATA Controller RAID 0, 1, JBOD support
IPMI	Support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IPMI20-E)
Network Controllers	Dual Intel® 82571 Single Port PCI-e Gigabit Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics	ATI ES1000 SVGA PCI video controller with 16 MB of video memory
Super I/O	National 87427 chip


Input / Output

Serial ATA	Two Serial ATA ports Two SATA hard drives supported
IDE	Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy	1 Floppy controller; 1.44 MB
LAN	2x RJ45 LAN ports
USB	2x USB rear ports 2x USB internal headers USB 2.0 Compliant / 1.1 Compliant
VGA	1x VGA Port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1 Fast UART 16550 serial port 1 Fast UART 16550 serial header


Chassis ( Optimized for X6QTE+ )

1U Chassis	SC818TQ-1000
Important Chassis Notes	To ensure system stability with Quad CPUs, a 1000W (minimum) ATX power supply [8-pin (+12V), 8-pin (+12V) and 24-pin are required] To ensure system stability with Cranford Dual Core CPUs, a (800W (TBD)minimum) ATX power supply [8-pin (+12V), 8-pin (+12V) and 24-pin are required] Chassis must have CPU mounting holes required for 1000MHz FSB CPUs with this serverboard.


Expansion Slots

PCI-Express	1 x8 (in x16) PCI-e slot


System BIOS

BIOS Type	8Mb Flash EEPROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 SMBIOS 2.3 DMI 2.3 PCI 2.2 ACPI 1.0 ACPI 1.0 (limited) BIOS Rescue Hot Keys USB Keyboard Support Hardware BIOS Virus Protection


Management

Software	Optional IPMI (Intelligent Platform Management Interface) 2.0 Super Doctor III Watch Dog NMI
Power Configurations	ACPI/APM Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on Mode for AC Power Recovery Internal/External modem remote ring-on


PC Health Monitoring

CPU	Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
FAN	Total of nine 3-pin fan headers 9x fans with status monitoring Status monitor for speed control Status monitor for on/off control Supports 3-pin Fans Low noise fan speed control
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 6x Fan Connectors I²C Temperature Sensing Logic Thermal Monitor 2 support
LED	CPU Overheat LED
Other Features	Chassis intrusion detection Chassis intrusion header SDDC
Environmental Spec.	Operating Temperature: 10º to 35º C (50º to 95º F) Non-operating Temperature: -40º to 70º C (-40º to 158º F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

Hot Items

USB / IDE to SATA Adapter!
USB 2.0 Hard Drive Cable

HDMI Cables and Switches
Apogee HDMI 1.3b Cables and Switchers

MG-45
MediaGate MG-45 Harddrive Media Player!

ATi HD 4670
In Stock Now!
ATI Radeon HD 4670 Video Card

Core 2 Duo
Intel Quad-Core X6800; Dual- Core E4300, E6750, E6850;

Case Modding
Express yourself! Add the Style and Flare to your Computer Cases

Asus Motherboards
Complete Asus Motherboard Product Line

Hard Drive Docking Station
USB 2.0, SATA, Thermaltake, Vantec

USB SATA Enclosure Case
IDE PATA eSATA Portable
HDD Enclosures

Best Sellers	External Hard Drives	Memory	Software
Case Mod Supplies	Hard Drives	Memory Card Readers	Sound Cards
Computer Cases	SATA Round Cables	Motherboards	USB 2.0 Devices
CPU Cooling Fans	iPhone Accessories	HDMI Switchers	USB 2.0 Enclosures
CPUs/ Processors	Keyboards & Mice	Power Supplies	USB 2.0 Flash Drives
DVD Burners	LCD & HDTVs	SuperMicro Servers	Video Cards

All items are brand new and in stock (unless otherwise noted) and are normally shipped within 24 business hours. All product names, trademarks or registered trademarks referenced herein are the property of their respective companies. Copyright 2001 - 2007, eXtreme PC gear .com