 |
ECS P4IBMS i845 Motherboard |
 |
 |
Nov 01, 2001, 08:30am EST |
 |
| |
Specs, Box Contents & Drivers
By: Dan Mepham |
| | Board Specifications |
| Form Factor | micro ATX |
| Interface | Socket-478, 478-pin |
| Chipset | Intel 845 (82845EP & 82801BA) |
| Memory | 3 x 168-pin 3.3V SDRAM (PC133/PC100) |
| Graphics | Off-board, 1 x AGP 2X/4X, 1.5V only |
| Expansion | 3 x 32-bit/33MHz PCI, 1 x CNR |
| I/O | 2 x ATA100 IDE Channels |
| Audio | AC'97 |
| Bus Speeds | 100MHz (400MHz effective) |
| VCore Range | Autodetect |
| BIOS | Phoenix D686 |
The package contents are normal for a board of this type. A User’s Manual, Driver CD, and IDE and FDD cables are included. The board is equipped with the standard Socket-478 retention bracket.
Fig 1. Elitegroup's P4IBMS.
If installing this board, or reformatting an OEM system, remember that Intel’s chipset drivers should be installed prior to any other drivers. Intel’s chipset drivers can be found at its support website, http://support.intel.com
|
1. Introduction
2. Specs, Box Contents & Drivers
3. Layout & Setup
4. On-board Features
5. Test Setup & Procedure
6. Test Results
7. Summary
|
|
Discuss This Article (5 Comments) - If you have any questions, comments or suggestions about the article and/or its contents please leave your comments here and we'll do our best to address any concerns. |
|
Rate This Product - If you have first hand experience with this product and would like to share your experience with others please leave your comments here. |
|
|
 |
|
 |
 |
 |
 |
|
|
|
