OK members, wanna see those Intel processor idle and full load temps.
Please be honest, no temps with a industrial fan blowing on a open case. LOL

Jay

The only Intel processor I still have is a P3 733 Coppermine slot 1. It runs at 50C/55C. With or without industrial fan. lol.

intel Celeron 2ghz OCed to 2.66ghz and as we speak, it is running at 33C, oop, it just jumped to 35C. and when i play games, it maxes at 48C.

now its at 34C


i have a thermaltake Volcano 7+ on it and 2 side case fans and a couple intake fans

Guys & gals,
I'm planning to build a Intel gaming rig in the next few months and also plan to use an ATI graphics card.

This is the reason I asked for INTEL cpu temps.
I want to know on an average where to expect my temps to be at more or less.

Thanks and hope these temps keep coming in.
Jay

Pentium 4 2.8C @ 3.1GHz - 45°C constant

Globalwin CAK4-88T cooler, single 80mm Themaltake exhaust fan, 3x40mm intake fans in vacant drive bay



Andy

I think it is a common misconception that AMD runs way hotter then Intel, just to let you know, kind of an urban legend. I will say this though, AMD gives you the crappiest stock fan possible! I’ve never owned a modern Intel chip before, do they come with good heatsinks?

i never monitored my cpu with my old heatsink, but thermaltakes arent all that expensive and its keeping my temp below 40C at idle

I have a p4 2.66 and with the heatsink pad it ran at about 50c (bios)

I took off the pad and got some silvery(not AS3) heat sink grease and not it runs at about 46 with the stock hsf...Just make sure that you get all the pad off.

Trent,
Are those temps at full load or idle?
Also, do you use any programs or do you play any labor intensive games?

Thanks,
Jay

i oced my 2ghz celeron today to 2.8 ghz and it idles at 39C now. Full load 50 C playing planetside and return to caslte wolfenstien

Looks like most of the house members are AMD.

My hp runs at about 50c after gaming for 3hrs in higher heat conditions, no ac and it is 90f outside, and suring the internet for awhile after. My hp doesnt have a good heatsink either, i think they got to the point they dont even put a fan on it, they just run this vent thing on to the rear fan. Sad i know.

yeah my old Dell did that (not really old, i got it in January and im already getting rid of it!)

I had a 2.53Ghz P4 on a D845PEBT2 mobo with the stock fan. it ran at 39 idle, and 45 load. thats from the intel software which came with the board.

Old post I know, but here is my current temps:

Idle: 34c / 93f cpu
Idle Case: 31c / 88f

Load: 45-50c / 115-120F

This is OEM HSF with tape, P4 3.0 w/HT on a I865GBF mobo.

-=M=-

P4 3.0 Ghz 800 FSB Stock running 35 degrees C or 93 F normally. If I run SETI it kicks up to 47 degrees C.

idle load from AIDA32 31 degrees C for CPU, 32 C for Motherboard 33 for Northbridge, 4 case fans that are allowed max, unless if i cut a hole in side and top of case.

80 MM fans, 1 connected to CPU(slowest) other 3 connected to PSU(fastest)

P4c 2.8 @ 3.3 o'clocked
Vcore 1.52
idle (0-3% usage) 42c
load(100% usage) 67c
ambient temp 21c
PSU 31c
System 26c
factory HSF
NB fan
2 80mm front intake
1 80mm side intake
1 80mm rear exhaust
PSU acting as exhaust