Please register or login. There are 0 registered and 823 anonymous users currently online. Current bandwidth usage: 326.30 kbit/s December 20 - 11:44pm EST 
Hardware Analysis
      
Forums Product Prices
  Contents 
 
 

  Latest Topics 
 

More >>
 

    
 
 

  You Are Here: 
 
/ Forums / Hard Drives /
 

  KERNEL DATA INPAGE ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE) 
 
 Author 
 Date Written 
 Tools 
Continue Reading on Page: 1, 2, 3, 4, 5, Next >>
Antonio Martin Jan 20, 2004, 07:43am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List Replies: 86 - Views: 87034
My problem is not new, i have found it in many forums, but no cause or solution yet.

My windowsXp hangs sometimes, showing blue screen with KERNEL_DATA_INPAGE_ERROR, with code 0xC000000E (STATUS_NO_SUCH_DEVICE)

If i reset bios doesnt detect HD (ST317221A). I must turn power off and then on again. I think the more time it is off, the more time it takes to hang again.

I changed my motherboard, IDE cables, memory and CPU and problem is still there. I checked HD many times, even with SEAGATE tools, and its in perfect conditions, no errors found. I

reinstalled windows XP a few times, and nothing happened.

I also fixed MBR with fixmbr utility... nothing.

I have passed a few good antivirus, especially in MBR, but looks clean.

Any idea about the cause of the problem? Thanks.


Want to enjoy fewer advertisements and more features? Click here to become a Hardware Analysis registered user.
Rob Wilson Jan 21, 2004, 01:08am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
Have you checked with board manufacturer to see if there is any bios updates? if so try flashing your bios it might help? Have you tried a different drive in another system to determine if the drive is the problem? what about your power supply? Verify that your ram type is compatible with your board recent some asus board have had issues regarding single side vs double sided and also some of the chips used on various memory out there... Just a couple of ideas for you to ponder...Good luck

Charles McKinney Jan 21, 2004, 02:54am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
Any other hard drives? Is it set to Master or slave?

Shadow_Ops_Airman1 Jan 21, 2004, 02:59am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
go here http://www.aumha.org for those type of codes.

AMD Athlon XP-M 2500+ (133x14= 1867MHz) (209x11= 2299MHz)
DFI LP NF2 Ultra-B (Hellfire 3EG Rev2)
Antec SX800, Neo HE 500, 4 Antec 8CM Fans
Thermalright SI-97 1 Antec Tricool 12CM Fan
CL SB XFi Xtreme Music
2x Barracuda HDs (250/400)
2x Samsung Write
Charles McKinney Jan 21, 2004, 12:07pm EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
and you receive the following KERNEL_DATA_INPAGE_ERROR stop error message:

0x0000007a (e163a3e4,c000000e,bf8e9313,0697f860)
This problem occurs on a system where Windows XP is installed on a hard disk that is configured as a subordinate ("slave"), and no other device is connected to the same IDE controller channel (primary or secondary).

From Microsoft Knowlege Base 330100 Looks like you are set on slave

chris Kleczynski Mar 01, 2004, 12:00pm EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
Actually I hate to tell you but your hard drive IS going bad and the standard HD diag tools are crap--they will not tell you if it's a periodic error or a controller problem. If you can, get another hard drive and image your current PC to the new drive...you'll see the Blue Screens disappear. Your current drive will continue to give you problems until one day it will finally just crap out altogether. The BIOS may even not recognize it at that piont (controller) or if it's the motor structure the BIOS will find it but the PC will give a NO BOOT DEVICE error or something like that.

What is happening is your drive is getting errors now and then and there is corruption in your page file. Also you might notice some or all of the following, slow OS and application load times, maybe even an occational "clicking" from your hard drive louder than a normal read/write sound, you may also see ATAPI errors in your System event log where the hard drive didn't respond to the OS in a time manner.

Time for a new drive buddy. ;)

Christopher Canova Mar 14, 2004, 05:39pm EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
Thank you for that last post. That is exactly what the problem I have: the hardware is clicking louder than normal, programs load slower, and there are BSOD errors every now and then. I think it is off to the computer store for me!

Orange Juice Nov 03, 2004, 07:42pm EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
interesting problem, i have it too, on two completely different systems. in one case, on a 20gb quantum fireball hd, i installed a win 2000 os, and now works fine, the problem disaappeared. on my 40gb maxtor, with a new MB, RAM and processor, without compatibility issues, xp worked fine for a few months, but now crashes almost every day. after the kernel data inpage error blue screen and "dumping phisycal memory to disk", it reboots, and doesn't detect my hd. like the others, i have to shut down pc and restart it. indeed, applications seem to run slower, and i didn't get to test the w2k yet because of a worm..which i had to remove by formatting the drive again. and by the way, does anyone now what exactly the "smart" on the MB monitors? because i get a warning 'bout my drive and i don't know how serious the problem really is

J C Nov 18, 2004, 11:12pm EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
Blue screen of death message:

Stop 0x0000007A (0xC02FFDA8,0xC000000E,0xBFF6ABFE...somethingafterthis)
Kernel_Data_Inpage_Error
BFF6ABFE base at BFF5C000, DateStamp 3e89d599-atapi.sys

always proceeded by a: "beginning dump of physical memory"

Running Windows2k Pro on a relatively outdated system.
Recent problem: occurred within the last couple of weeks, after installing World of Warcraft on a secondary HD (primary slave)
Before crash occurs:
HD begins clicking loudly (extremely noticeable) and everything stops working (extreme lag?)
Afterwards, upon reboot:
my computer fails to detect my primary-slave HD
computer fails to load windows properly, stating the need to insert a boot disk

HD types:
Primary Master: ST340824A 3.05
Primary Slave: ST360020A 3.39

Problem:
A variety of theories, rumors, legends, as well as "help" from microsoft.

Those who favor Hardware:
HD failure imminent - soln: buy a new HD
Memory problems - soln: buy new memory
(http://computing.net/hardware/wwwboard/forum/10047.html)

Microsoft 'logic' (?):
http://www.microsoft.com/resources/documentation/Windows/XP/al...p_fvlq.asp

"Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
and you receive the following KERNEL_DATA_INPAGE_ERROR stop error message:

0x0000007a (e163a3e4,c000000e,bf8e9313,0697f860)
This problem occurs on a system where Windows XP is installed on a hard disk that is configured as a subordinate ("slave", and no other device is connected to the same IDE controller channel (primary or secondary).

From Microsoft Knowlege Base 330100 Looks like you are set on slave"
Sounds like a reasonable explanation - but why would problems only start recently if this is the case? Are systems able to switch from master to slave automatically?

I also hold in favor of the idea that there's something wrong floating around in my computers memory cache. Reboots do nothing for me continues to fail at detecting my primary-slave, but if I fully power down, it will more often than not detect it (to give me the BSoD at a later point in the startup phase.)


Actual Solutions:
Unknown???!!!

If anyone knows what the heck, Post ASAP.

J C Nov 18, 2004, 11:13pm EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
sends me email when reply posted :)

Orange Juice Nov 19, 2004, 01:24am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
Well, i bought a new drive and now it's workin' fine...my 2'nd drive, now set as the primary slave( i bought a s-ata drive..so the old hd remained on the primary ide) still has the problem, sometimes fails detection...
i hope only that i tworks till i get all the data on cd's, if i had to make a bet, i'd say it was the drive..but the os is crappy too...

Pablo Ferrer Dec 27, 2004, 05:42pm EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
I'm getting the same error on my system. Win XP on Asus P4C800-E Deluxe, one 512 Kingston dimm with a brand new 160gb Seagate S-ATA drive. As I've been reading on this and other forums it doesn't seems to matter hardware specs, since completely different hardware are getting the same error (including a notebook, another PC with a 15gb 5400 HDD, etc.). I would then guess that the problem is purely Microsoft's fault. W2K and XP are both getting this BSoD, I'm completely lost and all I can do now is wait (maybe for a patch release).

chris Kleczynski Dec 28, 2004, 09:14am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
Unfortunately it seems you have not read THIS topic thoroughly enough though since you would have come to the realization that it is most likely your hard drive and NOT Microsoft. In fact, at least Microsoft is telling you the best it can about your hardware failure. ;)

Just because apart is newer doesn't mean it can't fail. ;)

Pablo Ferrer Dec 28, 2004, 09:30am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
It doesn't fail with Linux, or other OS that is not w2k or xp.
And what about this post (from another forum talking about the same problem)?
http://forums.winforums.org/showpost.php?p=31928&postcount=13
It seems there's a software-side solution to the problem, I'm waiting this guy to send me those files so I can check it out.

chris Kleczynski Dec 28, 2004, 10:19am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
Okay I read that post... here are my thought:

Let's see how can I put this gently... that is the most n00bish, ignorant user, asinine post I have ever seen. ;) But seriously...

A "dump" file is just that...a dump of the physical contents of your memory at the time of the BSOD. This can be used to help debug the real problem as you can see whatever was in memory and what was running at the time, but that's it. Not only will him giving people this file do absolutely nothing, but, depending on its contents, he could be giving away to any knowledgeable tech very confidential information about himself without even knowing it. He has basically told people to put log file on their PC's and it will magically fix the problem.

His heart's in the right place... but that will do nothing to fix the problem. You'll notice he also ran a defrag and chkdsk too; that's more likely his fix, at least until the drive gets worse. If you read the other guy's posts they are saying the same thing as me--bad drive or bad IDE controller on the drive (maybe the cable but least likely). I'm not saying it's DEFINITELY the HD, I am saying it's a good bet and I'd eliminate that question before anything else. Linux uses a different file system and is not as sensitive with S.M.A.R.T. enabled drives. But let us know when you start just mysteriously getting corrupt files and missing data on your EXT2 partitions too. ;)

You can use his dump file if you want... but come back here <i>when</i> that doesn't work. ;)

Pablo Ferrer Dec 28, 2004, 11:30am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
I'd rather start looking for my hdd's bill instead ;P

chris Kleczynski Dec 28, 2004, 11:50am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL_DATA_INPAGE_ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
he he... now THAT sounds like a plan. ;)

Pablo Ferrer Dec 29, 2004, 07:45am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List

Edited: Jan 16, 2005, 10:15pm EST

 
>> Re: KERNEL DATA INPAGE ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
Now, the problem is that the store where I got my drive won't change it unless they can replicate the error :(

Well, since this problem appears to happen mostly when Windows tries to recover chuncks of memory from the paging file into RAM, I wrote a little C program that could help replicate the error. Here's the source code:

#include <windows.h>
int main(int argc, char *argv[]){
char* base;
long i, size;
printf("Memory to play with (MB): ");
scanf("%i", &size);
size *= 1048576;
for(;;){
base = (char*)malloc(size);
for(i = 0; i < size; i++)
base[i] = 'x';
Sleep(10000);
free(base);
}
return 0;
}

While running, the system keeps allocating and deallocating memory from the heap, so my HDD is working hardly enough to make this error pop up sometime (hopefully). My system has 512 RAM, so I'll leave it running with an input of 1024 (1GB). I'll keep using my computer as usual to see if the damn BSoD pops up. Obviously, system gets a lot slower when running this program. I'll keep you informed ;)

chris Kleczynski Dec 29, 2004, 09:23am EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL DATA INPAGE ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
Wow, that's pretty slick, mang! Yeah, keep us informed if that ups the frequency of the problem that could be VERY useful as intermittent problems are always extremely hard to diagnose and fix.

Dang, now you got my juices flowing and I might take a crack at a script too--something to REALLY tax it. :D

Pablo Ferrer Dec 29, 2004, 01:48pm EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List

Edited: Dec 29, 2004, 03:49pm EST

 
>> Re: KERNEL DATA INPAGE ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
Great, after a couple of minutes running MemSucker 9000 :P, the KERNEL_DATA_INPAGE_ERROR BSoD appeared ;)
I also made a simple batch file which copied and deleted some large files constantly to stress my HDD even more.
Now I hope the guys at the store doesn't believe my app. is responsible for making the BSoD appear :(
Would I need to teach this guys some C to believe me? :S
I hope not.

chris Kleczynski Dec 29, 2004, 03:57pm EST Reply - Quote - Report Abuse
Private Message - Add to Buddy List  
>> Re: KERNEL DATA INPAGE ERROR - 0xC000000E code. (STATUS_NO_SUCH_DEVICE)
That's sweet! you rock dude!


As for the techs? Those Best Buy/CircuitCity/CompUSA techs are pimple-faced idiots anyways... just put it in the startup key in the registry and they'll never know the difference ;)


Write a Reply >>

Continue Reading on Page: 1, 2, 3, 4, 5, Next >>

 

    
 
 

  Topic Tools 
 
RSS UpdatesRSS Updates
 

  Related Articles 
 
 

  Newsletter 
 
A weekly newsletter featuring an editorial and a roundup of the latest articles, news and other interesting topics.

Please enter your email address below and click Subscribe.