Chris McNally said:
Check your IRQ's for conflicts.
and try the appropriate drivers for your system.
Turn off fast writes in the Bios (if it's currently on)
Check compaq site for possible Bios updates
Try removing ATI control panel and see how you go
If you get no joy with any of these, get back to us and I'll start scratching my head again.
1) Monitor shutdowns and do not wake up when watching youtube videos, sometimes watching in fullscreen. Results in VPU recovery.
2) BSOD: The exact BSOD error message is as follows:
A problem has been detected and windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following file : ati2dvag
If this is the first time you 've seen this stop error screen, restart your computer.
If this screen appears again, follow these steps :
The device driver got stuck in an infinite loop. This usually indicates problem with
the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates.
This happens any time without overclocking, or while just browsing or performing other windows operation.
Windows XP professional SP2
Adobe flash player: 10.2.152.32
Motherboard: ASUS M4A784TD-V EVO
Graphics Chipset: ATI Radeon HD 4200[onboard card] Graphics Bus Capability
CI Memory Size: 700MB Memory Type: HyperMemory.
Chipset: AMD 785G /SB710
Memory : DDR3 Kingston 4GB (2*2)
Dell HD monitor – DVI
PSU – 500W
This issue is open from two long years and no solution yet from AMD or Microsoft, could you please guide me to the fix/patch or let me know the right reason. As the docs provided below, it only talks about the hardware compatibility, and my configuration is compatible.