Hi
My 7300GS drivers doesnt want to install

It says "No hardware found" in the setup.(84.63)
I have the 93.71 drivers but since the installation of these
drivers my PC locks up in CS and esspecially in HL2 with Engine
ERRORs and trash like that!!But CS source just locks my pc!
The PC is quite new but is extremely slow for a 1.80DUO iNtel.
Does the 32bit WINDOWS XP really have that big effect on duel cores?
What could i be doing wrong??
PLEASE HELP!!!!!!!!!!!!!!!!!

Where did you down load the drivers from?Some times the installers are messed up and you need to install them manually.I know guru3d.com has quite a few drivers for download that need to be installed from the device manager

just thought of something that drivers is pretty old it might not support thge 7300GS try a newer driver

dude these drivers are for note books..

How do you mean your PC is quite slow?

And what CPU do you have? is it an E6300 Core 2 Duo? (1.83Ghz)

In what sort of apps are you noticing slowness?

As for the GFX card, try another driver set.

The downloads section at Guru3d.com has all the latest drivers & betas you'll need.

84.63 are laptop drivers.

Those drivers are for the GeForce Go 7800/7900 series laptops

I noticed in IE and overall performance!!Even when opening files and so.

Think theres a virus!!Ran n S#@t load of scanners from 3 different Anti Virus Progs.and some where found!Of which NORTON did`nt pic out ONE!!!Taken care of but something is`nt right!

Thanks for the Notebook tips,but I didnt notice cause the Nvidia website did not say anything about NOTEBOOK drivers!U choose in those little boxes what you want so they never mentioned it!

Sorry for the grammer!

How do you know which are notebook or Desktop pc drivers??

Well they would generally be released as such.

You could check in the .inf file to see if your card is supported

Try these instead, 97.95 Win 2K & XP
http://downloads.guru3d.com/download.php?det=1601

Thanks for the .INI tip!!Very handy
How about these drivers??
Forceware 101.02 2000/XP (32-bit)
http://downloads.guru3d.com/download.php?det=1609

Also notebook??

The PC is quite new but is extremely slow for a 1.80DUO iNtel.
Does the 32bit WINDOWS XP really have that big effect on duel cores?
What could i be doing wrong??
PLEASE HELP!!!!!!!!!!!!!!!!!
PLEASE REPLY on this aswell !!

THANKS!!

Those 101.02 drivers should work ok as long as you know how to use/install the modded ini.file.

Now why is your system so slow?We will will need to know more about this PC.Like make and model since im guessing you bought it.Tell us everything you can and down load cpuz and that will tell you about your chipset and ram timings etc

Number of processors 1
Number of cores 2 per processor
Number of threads 2 (max 2) per processor
Name Intel Core 2 Duo E6300
Code Name Conroe
Specification Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
Package Socket 775 LGA
Family/Model/Stepping 6.F.6
Extended Family/Model 6.F
Core Stepping B2
Technology 65 nm
Core Speed 1607.7 MHz
Multiplier x Bus speed 6.0 x 268.0 MHz
Rated Bus speed 1071.8 MHz
Stock frequency 1866 MHz
Instruction sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2048 KBytes, 8-way set associative, 64-byte line size

Chipset & Memory

Northbridge Intel i945G/GZ rev. A2
Southbridge Intel 82801GB (ICH7) rev. 01
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 1024 MBytes
Memory Frequency 334.9 MHz (4:5)
CAS# Latency (tCL) 5.0 clocks
RAS# to CAS# (tRDC) 5 clocks
RAS# Precharge (tRP) 5 clocks
Cycle Time (tRAS) 15 clocks
Bank Cycle Time (tRC) 21 clocks

System

System Manufacturer
System Name
System S/N
Mainboard Vendor Gigabyte Technology Co., Ltd.
Mainboard Model 945P-S3
BIOS Vendor Award Software International, Inc.
BIOS Version F1
BIOS Date 07/11/2006

Memory SPD

Module 1 DDR2, PC2-5300 (333 MHz), 512 MBytes, Transcend Information
Module 2 DDR2, PC2-5300 (333 MHz), 512 MBytes, Transcend Information

Software

Windows Version Microsoft Windows XP Professional Service Pack 2 (Build 2600)
DirectX Version 9.0c

Heres the SPECS.
Compiled from CPU-Z
Can you please explain to me how the .ini file is supposed to be EDITED?or whatever I should do?
THANKS